HALTER GOWN

Silk charmeuse is pure luxury. It is soft, elegant, and surprisingly versatile. Charmeuse is a medium weight, woven silk with a lustrous appearance, rather like the surface of a pearl. And like the pearl which it resembles, it is an elegant classic!

Try it to create this alluring halter gown… the perfect creation in a super flattering style. Very easy pattern to make, the halter is not fitted, so slips over the head and ties at the nape while a fabric rosette adds interest detail for a romantic touch.

You will need:

• 3 ½ yds. of charmeuse, 54″ wide
• 3 ½ yds. of sheer organza, 54″ wide
• 3 yds. of satin ribbon, 3″ wide
• Coordinating thread

PATTERN

CUTTING

Fold fabric in half on crossgrain with selvedges aligned. Baste selvedges together with long stitches.

Place centerfront [CF] of pattern on fold. Weight down and cut out fabric 1X on fold.

For rosette, cut pattern 1X on true bias grain

ASSEMBLY

To make rosette, pink curved edge. Fold fabric lengthwise in half. Sew a running stitchalong the folded edge and gather tightly. Starting with the narrow end, spiral the fabric onto itself and tack gathered edge as you form the rosette.

Staystitch 1″ either side of notch [●] on centerback seam [CB] using ½” seam allowance. Clip seam allowance to stitching.

With wrong sides together, layer the charmeuse and organza. Pin and baste between ● to CF. Sew seam using ½” seam allowance. Clip a V-notch in seam allowance at CF. Press seam open.

Along curved edge, match edges and sew both layers together using a 1/2″ seam allowance. Trim seam allowance. Turn right side out through CB seam.

Press seams flat. Baste CB seam together. Topstitch along curved seam through both layers to finish the hem.

Cut ribbon in 2 pieces for strap ties. On one end, fold the ribbon at a 45°angle with a ½” extension.

Align the L-shape to the CB with the garment face up and place the ribbon on top of the finished edge, stopping 3″ from CF. Repeat in reverse on the opposite side of the CF.

Topstitch ribbon ties through all layers of the garment on both edges of the ribbon.

With right sides together, pin and baste CB seam. Stitch back seam using ½” seam allowance. Press seam open.

Crisscross strap ties at a 90° and sew through opposite corners of the layered ribbon. Fold back “point” at CF and tack down. Attach rosette at CF.

TIP: Check this link for working with charmeuse and organza fabrics.