суббота, 21 мая 2011 г.

старые знакомые с новыми публикациями

But I’d love to think Beyonce and her stylist Ty Hunter watched my E! News segment and were inspired by my segment to create a fringe mini skirt (Yes I know they filmed the video before my segment aired, but please don’t ruin this for me!)
If you were able to catch my DIY segment on E! News then you’ve already seen this tutorial and hopefully you’ll be creating one soon and sending me pictures… hint, hint. If you missed it, below is the quick and easy how to…
Materials: A fancy belt (the one pictured is from Target), 2 yards of fringe, glue, scissors
Glue two rows of fringe to the back of the belt. Let dry, then wear over a skirt and shake your groove thang!
You can use any color fringe and wear over any color skirt. Using the ombre fringe could also be an added bonus. The sky is the limit!
Don’t ya’ll laugh… I’m doing my best Beyonce!

DIY Tutorial: Kimono-Jacke

DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen
Hier ein weiterer Teil meiner Flohmarkt-Ausbeute: Als ich diese Bluse entdeckte, war ich vom Material und dem Muster begeistert und dachte sofort daran, dass sich daraus bestimmt etwas Tolles basteln ließe. Deshalb schreckten mich Mankos wie die Größe (40/42) und die Monster-Schulterpolster auch nicht sonderlich ab. Bei näherem Betrachten merkte ich, dass man die Pads leicht entfernen kann, was mich auf die Idee brachte, die Bluse auch von dem Kragen und den Brusttaschen zu befreien. Abschließend waren nur mehr kleine Korrekturen notwendig, um die „Omi-Bluse“ in ein Kimono-Jäckchen zu verwandeln.
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen So sah die Bluse ursprünglich aus.

Für dieses DIY Projekt brauchst du:

DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen
1.) weite Bluse (am besten zwei Kleidernummern größer)
2.) Nahttrenner
3.) Nähzeug
4.) Stecknadeln

DIY Tutorial – Die Anleitung:

DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen - Schritt 1 von 4 Alle typischen Merkmale einer Hemdbluse, also den Kragen, die Knopfleiste und die Taschen (falls vorhanden) abtrennen.
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen - Schritt 2 von 4 Die Ärmel bzw. die Manschetten auf 3/4 Länge abschneiden.
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen - Schritt 3 von 4 Nun werden die beiden vorderen Kanten an den typischen Kimono-Schnitt angepasst. Dazu die Bluse am besten vor dem Spiegel (oder auf der Schneiderpuppe) anziehen und einen weich abgerundeten Kantenverlauf mit Stecknadeln fixieren. Die Kanten für das spätere Einsäumen umgeschlagen und kürzen.
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen So sollte die Bluse aussehen.
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen - Schritt 4 von 4 Absteppen. FERTIG!!!

DIY Tutorial – Das Endergebnis:

DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen
DIY Tutorial: Kimono-Jacke aus einer alten Bluse machen
Weitere Bilder meines DIY Kimono-Jäckchen findest du in diesem Blog-Beitrag.

studs-and-pearls

DIY: Cluster Bracelet


This is the perfect way to use up all those random pieces and leftovers from past projects. Goodness knows I have 3298478489123million odds n' ends waiting to be used. I've been meaning to make a cluster bracelet for some time...so when I found this wide silver cuff bracelet at H&M, I knew it'd be perfect. It was actually in a pack of 2, for only $9.95. They had gold as well, which I'm thinking I'll need to pick up for future projects. You can always use a vintage cuff bracelet, too!


Supplies:

- Metal cuff bracelet
- Buttons, cabochons, beads, flat stones, stud earrings
....everything and anything.
- E6000/super glue
- Pliers, if you needed


 1) If you're using some old earrings, use your pliers to cut off/pry off the backs, to create a flat surface to work with. I never wear these red studs, so this DIY was perfect for them.


2) Figure out the general placement of your pieces. This will probably change as you go along, but this will give you a broad idea of how you want to go about it.


3) Glue away.


4) Keep gluing...


5) Towards the end I decided I need more gold/brass, so I found some faceted rectangle pieces to throw in. Keep an open mind and be ready to possibly go back through your stash of supplies for some extra components.


Let dry, and you're good to go.

Next DIY is a clothing reconstruction. If there's anything I love about spring and summer, it's the warmer weather and the DIY clothing opportunities that come with it. I love making and altering clothes for this kind of weather, so keep an eye out for more clothing projects in the next few months.

My Friday night is going to be spent in, just relaxing. It's my first weekend in the past month that I'm NOT out of town...& while I love visiting people, it's kind of nice to take it easy this weekend. Time to curl with a glass of wine and a good movie.

Hope everyone has a great weekend <3!

xo,
 

DIY: Scarf Vest




One step DIY's are the best. Am I right or am I right?

I recently made this scarf into a more wearable piece of clothing, by simply cutting two slits. It's all about where you cut the slits. The best part: you can still wear it as a scarf if you wanted to.

Some of you might also recognize it from the pictures I posted from the ReadyMade Magazine Party. My style is more on the casual side, so this scarf vest is a perfect way to dress up an otherwise plain t-shirt.



I used a 30x30 vintage square scarf. It's already on the bigger side of scarves, so I'd recommend finding the largest square scarf you can find. For reference - I'm about 5'2", and you can check out the pictures above to see how a 30x30 scarf vest fit me. It'll all depend on your height, your preference, and the scarf you use, but the pictures above will help you gauge how your finished piece will look.

Supplies:

- Large square scarf or fabric
- Scissors
- 3 minutes of your time




First and only step: cut two diagonal slits on either side of the scarf's midpoint.
That's it!

Don't worry about making everything perfectly straight. You can tell just by looking at the above picture that I didn't even cut them straight, either. When worn, the scarf will flow and fold within itself - so being a few inches off won't matter at all.

I eyeballed this and didn't measure anything before hand, but I understand that's not everyone's style. SO if you're still hesitant, check out the diagram below. I included measurements for my particular vest, but keep in mind that it was done on a 30x30 scarf. You can always adjust accordingly depending on the size of your scarf.


(Click to enlarge)

You don't even have to use a scarf if you don't want to. If you have a large piece of fabric laying around...by all means, make that into a vest, too!


Thanks to Jenni from I Spy DIY for helping me snap these pictures!


Again, don't forget to check M&J Trimming's website tomorrow, Tuesday May 17, to see the DIY's that I made with their surprise box of supplies.

Also happening this week: meeting up with Glamour Kills Clothing, and an interview I had with Smashion will be also posted.

I've received a good number of questions for the Q&A video I'm doing soon, so if you haven't already - feel free to send a question kirsten.studsandpearls@gmail.com or leave a comment below.


xo, 

had so much fun creating these projects with the surprise box that M&J Trimming sent me. There’s a lot of variety within these 6 projects, so I hope you’re inspired to try out at least one of them! Enjoy, and Happy DIY’ing!

_____________________

Project 1: Multi-Finger ring
Multi-finger rings have been spotted everywhere lately. As one of this season’s hottest trends, you can make your very own multi-finger ring with just a few supplies.
Supplies:
- 3 Fashion Dome Buttons Item# 46459 in Teal
- Button shank remover
- Scissors
- Scrap of pleather or leather (1.5″x2.5″)
- Super glue
- 3 ring blanks
1) Fold the scrap pleather/leather in half, lengthwise.
2) Glue along the inside.
3) Remove the shanks from the back of the buttons.
4) Glue the buttons onto the rectangle.
5) Glue the ring blanks on the back of the rectangle.
6) Let dry.


 _____

Project 2: Chain and Cord Bracelet
This statement bracelet looks complicated, but it really isn’t! I love the combination of different textures, between the chain and the cord.
Supplies:
- Cord/Braid Item# 887060198 in Ovocado (1.800.9.MJTRIM) , about 60 inches
Kelly Green Color thread Item#42681
- 1 Fashion Dome Buttons Item# 46459 in Teal
- Thick wide curb chain
- Sewing needle
- Scissors
- Jewelry pliers
- Jewelry clasp and jump rings
- Clear nailpolish
Tip: Wrap tape around the ends of the cord to prevent them from fraying while you make the bracelet.
1) Cut the cord into two 30 inch pieces, and thread one piece through the first link of the curb chain. Fold the thread in half to make sure that there’s the same amount of thread on either side. Take the bottom strand, fold it over the top strand and then through the second link.
2) Take this strand and fold it back over the chain, and under the other strand. That other strand then goes through the chain.
3) Repeat steps 1-2 until you reach the end
4) Thread the other piece of cord through the first link of the chain, and repeat until you’ve braided the other side.
5) Sew the ends together, and sew on the button to accent the bracelet.
6) Sew the clasp onto the cord, trim the ends and secure with clear nail polish to prevent fraying.

_____

Project 3: Ribbon Wrap Bracelet
This Ribbon Wrap Bracelet is the ultimate spring accessory; it totally reminds me of flowers, sunshine and nature. You can also use the same method with different types of ribbons to create a completely different vibe.
Supplies:
- Hand Dyed Silk Satin Ribbon Item# 33583 about 120 inches for a 7 inch bracelet
- Rhinestone trim (*this is actually from M&J Trimming as well, but I had this beforehand.)
- Scissors
- Hot glue gun
1) Fold the ribbon in half about 4 times. You might need to fold more or less times depending on the size of your wrist.
2) Tie the ends together in a bow.
3) Wrap a 1.5 inch piece of rhinestone trim around the bow, and secure with hot glue.

____

Project 4: Shoulder Trim Shirt
You can give some life to a plain old shirt by using gold trim to accent the shoulders. I love the way the trim hangs off the sleeves – it adds a sultry, flirty element. Regardless of what color shirt you choose, the gold trim will look amazing with any color.
Supplies:
Gold Chain Item# 44522  (1.800.9.MJTRIM)
Peacock Color thread Item#42681
 - Sewing needle
- T-shirt of your choice
- Scissors
1) Find the seam on the shoulder of your shirt. Line the trim along the seam and sew the edge of the trim to the edge of the shirt.
2) Sew the trim in the middle, with just a one or two simple stitches.
3) Sew in a few more spots along the trim.

_____

Project 5: Gold Trim Headband
This headband is my personal favorite; it can add some gypsy-inspired flair to any outfit, and will look great whether you have short or long hair.
Supplies:
- Gold Chain Item# 44522  (1.800.9.MJTRIM), about 13-15 inches
- Elastic, 7-8 inches
- Super glue1) First and only step – glue both ends of the trim to the elastic. Instant headband.

_____

Project 6: Thread Tassel Keychain
Tassels are one of the hottest trends right now. You can easily make your own tassel with some thread, a pair of scissors and a small book. The best part?  You can even use different colored threads to create fun, multi-colored tassels.
Supplies:
- Metal Tooth Pendant Item# 42406
- Peacock Color thread Item#42681
- Small book
- Key ring
- Scissors
1) Create your own skein of thread by wrapping the thread around the book, about 40-50 times.
2) Slowly slip off the thread and tie the top section off, with a spare piece of thread. This will form a loop.
3) Attach the tassel and horn pendant to a key ring.